You can rest assured
when booking
Fusion Cleaning.
We provide a
very professional service. You can trust our highly
experienced operator to carry out the task
diligently and affectively.
With the support and backing of Australia's major
tile and stone chemical supplier, combined with the
latest truck mounted equipment, only the best
results can be expected.
Your satisfaction is
our satisfaction
When looking at
other services often the cheapest is not the best.
Cheaper jobs can often end up being a nightmare that
could have been avoided.
The indoor or outdoor tiled area you are considering
cleaning can often be harmed by using the wrong
cleaning chemicals, or the incorrect cleaning
equipment.
For our customers we use the best of the best.
Hydramasters Boxxer truck mounted equipment and
Razorbacks portable equipment.
Be it terracotta, porcelain, ceramic, terrazzo or
stone tiles, Fusion can tackle the area with its
safe and advanced cleaning process.
Agitated SX12
Rotary Pressure Clean
Step 1 Meet with client and discuss;. Problem areas, Time taken, Expected results, Hazards: people-animals-environment.
Step 2 Tiled areas are presprayed with the correct
solution and allowed dwell time. Operators are fully trained and experienced to
identify tiles and solutions
needed. Problem stains like rust and red wines are
addressed. Please note tiles now are very slippery so
caution must be taken.
Step 3 Machine scrub/agitate tiles and grout to assist
soil separation and stain removal. Heavy rotary floor polisher with nylon brush
attachment is used to
maximize results Hand scrub corners and hard to get places.
Step 4 SX12 Rotary Pressure Wand is passed over the
areas to complete the clean. 25HP Briggs and Stratton powered Truck mounted
equipment Up to 90’C steam temperature Up to 2500psi blast water pressure for deep clean·
Regulated pressure to suit
delicate tile or grout Pressure jets rotating at up to 800rpm cleaning
the same piece of tile
13 times a second All encased in a vacuum wand extracting all mess
and solutions back to
van tank No spray up walls, gardens or surroundings
Dirty Grout is one of our customer’s major areas of
concern!
The nature of grout being porous means it’s the first to
attract dirt and be penetrated by oils. Fusion’s cleaning
process can provide dramatic results returning the grout to
its original colour you may once remember. The nice bright
and clean floor is easily achievable.
We recommend then applying sealer to reject future
penetrates. Some sealers lasting up to 15 years
Knowing which
and how to use the correct chemical
for the job is half the
battle. We will arrive with
alkaline and acid
substitutes, degreasers, strippers
and special
poultice pastes to draw out deep down
dust stains
porous tiles.
Today’s chemicals have come as far as being just as
strong but safe on the operator and environment
Problem areas,
Time taken,
Expected results,
Hazards: people-animals-environment.
Operators are fully trained and experienced to
identify tiles and solutions
Problem stains like rust and red wines are
addressed.
Heavy rotary floor polisher with nylon brush
attachment is used to 
Hand scrub corners and hard to get places. 
25HP Briggs and Stratton powered Truck mounted
equipment
Up to 90’C steam temperature 
Up to 2500psi blast water pressure for deep clean·
Regulated pressure to suit
Pressure jets rotating at up to 800rpm cleaning
the same piece of tile 
All encased in a vacuum wand extracting all mess
and solutions back to 
No spray up walls, gardens or surroundings
